Home
About Us
Products
News
Contact Us
Company News
Industry trends
Common problems and solutions of BOPP precoating film
The pressure of the rubber roller is too large, resulting in the deformation of the film, so the pressure should be appropriately reduced.
07
2023
/
01
Industry development trend of various substrates for pre-coating
The main raw materials for precoating film are BOPP film, EVA hot melt adhesive, BOPET film and LDPE hot melt adhesive.
Introduction of several advantages of precoating film
First, since no harmful substances are produced during the precoating process, the precoating process is more environmentally friendly.
The advantages of precoating film over film covering
That is, the common point of blistering and film stripping of the film-coated products processed by the gluing wet composite process is that the film breaks away from the substrate of paper and printing, and damages the compactness and smoothness of the paper/plastic composite.
How to improve the wear resistance of BOPP film?
To improve the wear resistance of biaxially oriented polypropylene membrane (BOPP membrane), a novel polypropylene surface modification coating with good transparency and wear resistance was prepared by sol-gel method, using silane coupling agent (KH550), aluminum sec butanol (ASB) and ethyl orthosilicate (TEOS) as precursors, solid acid (p-toluene sulfonic acid) as catalyst
17
2020
06
Development history and product classification of precoating film industry
The printing and film are combined by professional laminating equipment to form a paper-plastic product. This technology is called lamination. The surface of the printed matter coated with film is brighter and smoother, the pattern is more bright, and the performance of wear resistance, folding resistance, tensile resistance, moisture resistance, chemical corrosion resistance and other properties are also enhanced. Even some apparent defects in the printing process can be largely compensated. Therefore, not only the service life is extended, but also the beauty of the product is greatly improved. Since the film coating technology was born in the 1950s, the film coating technology has experienced three important development stages:solvent-based coating technology, water-soluble coating technology, and precoating technology.
Pre-coating film market size 2020 Pre-coating film industry development and market supply analysis
Precoating film refers to the process of laminating plastic film with paper print after pre-gluing and rewinding. The precoating film structure is composed of substrate and adhesive layer. According to different substrates, the precoating film can be divided into BOPP precoating film, BOPET precoating film and BOPA precoating film. The adhesive layer is mainly EVA hot melt adhesive and LDPE hot melt adhesive. Downstream mainly applies to the packaging of books, food, medicine, daily necessities and other products in the field of industrial printing, digital printing, card certification, anti-counterfeiting, commercial advertising and construction materials in the special products market in the field of commercial printing.